PART NUMBER: WD-297134
The Wayne Dalton remote control transmitter 297134 309884 is for Wayne Dalton garage door opener models using frequency 303 Mhz. Replacement remote for 1-button and 2-button remote control transmitters (no longer made)
Wayne Dalton 3-Button Remote Control Transmitter works with Wayne Dalton Classic Drive garage door opener models using 303 Mhz (3012, 3016, 3512) and Wayne Dalton Quantum models using 303 Mhz (3212, 3213, 3412).
Not HomeLink compatible.Includes:
All Wayne Dalton Garage Door Opener models using 303 Mhz frequency. (look on back of remote control or back of opener motor)
How to select the right remote control for your garage door opener model:
On the back of your garage door opener motor (attached to the ceiling in your garage) there should be a silver sticker which has the model number of your garage door opener written on it. Look for your model above.
If you have a remote control check on the back of it for the frequency number. It should say 303 somewhere on it.
You can look at the color of the antenna wire coming out of the powerhead unit to determine the frequency. For 303 Mhz frequency the antenna wire color is - Single wire - black, green, or white. Two wires - yellow and white
I cannot open the garage door using the remote control. The model is Quantum 3212. is this the correct remote control for the garage? How can I replace the original remote control with the new one?
Purchase this remote and follow the programming instructions included.
My 2nd garage door opener REMOTE isn\'t working. The battery is fine, the garage door just won\'t open or shut with it. My other one works great. How do I get the 2nd garage door remote to work again?
If you have tried reprogramming it and changing the battery, you may need to replace the remote.
Just purchased your model 3910 (PN 309884) remote for a second vehicle. How do I sync this new remote with the existing remote I have (model 02-3047-3BUH, PN 297134)?
Follow the second box for programming instructions - For the full instructions, and programming illustrations click here.
Have a Dalton model 3016, series # 3000 opener, both of our remotes are malfunctioning. What remote would we need to get?
This is the correct remote for that model.
Where can I get a transmitter to replace the one I have that says P/N 297132 303 Mhz?
This is the correct replacement
will this work with a 1997 quantum 3213 black wire on bottom of unit,model3000,60hz?
I have a Wayne Dalton garage door opener Model # 3212 Series# 3000 . Will opener # 297134 work with this door opener?
Yes. The 297134 remote control is compatible with the Wayne Dalton Quantum 3212 model
I would like to make sure that this remote will work with my Wayne Dalton Model #3012 Garage Door opener? My remote has these numbers on it MODEL 02 3047-1BUH. Pin 297132. FREQ 303. FCC ID K802-3047. My remote has quit working, yes, even with a new battery.
This is the only one made for your unit.
I have 3 openers all are Series 3212 manufactured 0798 model #3000. Is this the correct replacement remote? Can I program each button to operate a separate door so that all 3 doors work with the remote as the previous remote did?
Yes it is the correct remote and can be programmed with up to three motors.
Will this work with quantum 297131U?
Yes it will.
Can I use this control opener instead of 297132?
Yes. It is the correct replacement for that remote.
my remote is same model# and someone else has 1 of mine - thus the reason for new ones. Will this insure the old one cannot be used any longer?
No, you will have to erase the memory on your unit to remove the old remote from it.
Does this remote control opener work with Quantum 3213?
Yes it is the correct remote.
I have a garage door installed in 1997. I need an additional garage door clicker model is 02-3047-2BUH P/N 297133. I see you have 02-3047-3BUH P/N 297134 ...will this work as well?
Yes it is the correct replacement.
I have a Wayne Dalton 3213 and need a new remote, Do you have a replacement?
Yes. This remotes is the replacement.
We have an old 1 button. 02-3047, freq 303 for our garage. Would this transmitter work?
Yes it will.
I have garage door opener with the brand name Quantum Wayne Dalton Series 3212, Model No 3000, Pat #4231191, so what kind of clicker model do I need to buy? When I buy it , will I have to set up or program a new code or just keep the old one.
This is the correct remote for that unit. You will have to program it to your opener when you get it. Instructions are included.
Will this remote replace model O2-3038. Freq 303 ? This model is not listed under the compatible with section. If so, if I purchase two of these will I be able to program both?
Yes it is compatible and you shouldn't have any problems programming two new remotes.
I need a two (2) button remote, do you have one?
Two button remotes in 303 Mhz frequency are no longer made. This is the only 303 Mhz remote made at this time. It is the replacement for all single and double button 303 Mhz remotes.
my remote opener is model #02-3047-1BUH freq is 303 pin is 297132. I want to be certain I am ordering the correct one since the above one says 134 versus 132. Are they interchangeable?
This is the correct replacement for that remote. The 297132 is no longer made.
Can this Transmitter(297134 309884) listed above be used with my ClassicDrive Model 3012?
Yes it is compatible.
My RCT is 297132... &303 Mhz My RTC has only 1 push pad... not 3... I could use a new case. Only top was destroyed... unit still works... or is it necessary to buy 2 new ones with the3 pads?
The remote you have is no longer made. The 297134 is the only replacement.
will this work fora model 02-3047-1BUH P/N 297132 if so, will there be instructions included to program it to work?
Yes this is the correct replacement and it comes with programming instructions.
I have a model 3000 series 3313 will this opener work?
Yes this is compatible.
I have a Quantum garage door opener Model # 3000 Series 3212. The door remote is a Wayne Dalton 02-3047 Frequency 303. I need to buy another remote. Is this compatible?
Yes it is the only compatible remote available for that model.
I have a 02-3047-1buh is that still in use or is there a replacement?
They no longer make the 1 button remote you have. The 297134 is the only compatible replacement currently made.
I have Quantum Model 3316 and remote opener model 02-3047-1buh - Freq:303. If I purchase a new one, other two old remote opener which are working will work?
Your old remotes should continue to work. If any stop working when you program the new remote, just reprogram them until all are working at the same time.
How do I sync this to my garage door opener? At my previous residence, there was a \"Learn\" button on the opener. All I had to do was hold that down and simultaneously hold down the \"Open\" button on the opener, and all would be well. With the garage opener we have at our new residence (A Quantum/Wayne Dalton) I cannot find a Learn button (or any thing similar such as (Program,\" Sync,) etc.
If you have a Quantum unit the learn button will be as demonstrated here -
My controller won\'t work, I put in. New battery and no results?
That probably means you need to replace it.
How does the remote program?
I have a model 3012. We recently had a remote stolen from our car. How can I clear the memory to prevent that remote from working?
Visit this page for instructions on how to do that - http://support.waynedaltonparts.com/support/solutions/articles/3000030832-erase-memory-quantum-classic-drive-prodrive-idrive
I need to replace my Quantum remote control #02-3047. There is no suffix. I am wondering if it is the same as a 02-3047 ibuh, etc.)?
This is the replacement for all 02-3047 regardless of suffix.
I have a Quantum Model 3212, Model 02-3047-1BUH, P/N 297132. I have rec\'d WD-297134 as a replacement. Will this work correctly?
Yes, that is the only replacement remote made for that model.
I need a replacement for a Wayne Dalton Model #299264 remote. Are they available?
297134 is the only replacement for 299264 available.
Will this for sure work with the Quantum 3212 Series (Model No. 3000)?
Yes, it is compatible with that model.
My remote : Quantum Model 02-3047, Freq 303 has stopped working on both doors, my other remote still works on both doors. Battery replaced new, no improvement. Will this replacement work for my units?
Yes it is the correct replacement remote for that model.
I have remote WD-311085. Is the WD297134 the replacement part?
Yes, this is the only replacement made.
I purchased this remote and was able to program it to my existing Wayne Dalton garage door opener - the trouble is that this new remote is my fourth remote - once I programmed this fourth remote, one of the other remotes lost its connection. Does anyone know if there is a limit on the number of remotes you can have programmed to one door opener? I want to have a total of 4 (I have four drivers in our household) but whatever I do I can only seem to get three programmed at one time.
The memory on your unit should hold up to 5 remotes. Try reseting/erasing the unit and reprogramming everything fresh. Here is a guide on doing that - http://support.waynedaltonparts.com/support/solutions/articles/3000030832-erase-memory-quantum-classic-drive-prodrive-idrive
I have a Wayne Dalton/Quantum garage door opener. House was built in 2000. The booklet says Model 3000, Series 3312/3313. Remote says 303 MHz on the back. Is this the correct replacement remote to order?
Yes this is the only replacement remote that will work with your unit.
where can I find the instructions for programming a 297132 remote for a quantum 3213 on a internet website ?
Will this remote work on model 3012?
Yes it is compatible.
I just need an extra remote, will I have to reprogram my current remotes?
No, you will just need to program the new one.
My homelink device in my car programs to the remote control indicating it is compatible but will not operate the garage door. Is this because of the 303mhz signal receiver? Will I need a converter device?
303Mhz is not a homelink compatible frequency. You may need to get a homelink conversion kit to set that up properly.
My current remote open er is model 299264. Can I get a comparable remote?
This is the only replacement remote available for your unit. There are no other remotes made that will work. You will have to purchase this remote.
Does the opener accept codes from more than 3 transmitters?
this remote can operate up to three motors. Most motors can hold 5 - 6 remotes in memory.
How do I know which remote to buy for my Quantum garage door opener by Wayne Dalton?
Check the model and series number on your unit and then look under the product description for this item to see if it is listed under compatible with.
i need a replacement for my WayneDalton garage door remote it is model # 299264 what can I buy to replace it and how hard is it to program?
This is the correct replacement for that remote. It is easy to program and comes with instructions.
need new opener the numbers do not match but are listed as an alternate does that mean it will work to open our garage door?
Yes, the alternate part numbers listed are also compatible with this remote.
I need garage door opener for a Quantum, 3212 , Series 3000 ?
This is the correct remote for that unit.
I have a wayne Dalton Quantum garage door opener. what will I need to order for an in-car opener for this type?
You will need to know the model and series number of your Quantum unit to find the compatible remote for it.
Will it work with my model 3212?
Yes, it is compatible with that model.
I have a 13 year old Wayne Dalton garage opener. One of our remotes has failed. I wish to replace . . Pin 297132 freq303. Will above item work? Also have a home link vehicle now. Can I program transmitter to my car?
Yes this is the correct replacement remote - Wayne Dalton Remote Control Transmitter 297134. Your unit is not homelink compatible. You can add a homelink conversion kit to make it work, but otherwise it won't.
I have a wayne dalton residential garage door opener, model # 3012. Is this compatable for my opener and is it hard to program?
Yes, this is the compatible remote for your 3012 unit.
I need a remote to work my opener. Model-2-3038 freq. 303 Wayne Dalton.
The remote this question is posted under is the correct one. 297134. It is the only 303Mhz remote made.
Is this remote compatible with 1/3 horsepower model 3313?
Yes it is
I need to replace my old remote for my Wayne Dalton Quantum series 3212 (303 hz) garage door opener. Will it work with my car\'s homelink button? Indicates \"no\" in the literature. No review mentions this.
No, your unit is not homelink compatible.
Another question. If I program the new remote, does it change coding such that I have to reprogram homelink in all cars? Earlier question was \"is this remote compatible with homelink?
You should not have to reprogram any other remotes previously linked when you program a new remote in.
What replacement remote control do I need . My defunct opener is model # 02-3047-3BUH?
This is the correct remote - Wayne Dalton Remote Control Transmitter 297134 309884 (303 Mhz)
Is this item the correct remote for the Quantum door opener model no. 3212?
Yes it is
Is a transmitter the opener it self or do you have buy the opener too?
This is a remote for a Wayne Dalton motor. It is also called a transmitter and a garage door opener.
How does one program another remote for model 3412? i CANNOT FIND A LEARNER BUTTON.
Take a look at these pictures to see where the program button is located on the powerhead:https://cdn.shopify.com/s/files/1/1499/9402/files/programbutton2.JPG
Will this remote operate my Wayne Dalton Door that I purchased in @ 1999 ?
This remote is compatible with all Wayne Dalton Garage Door Opener models using 303 Mhz frequency. (look on back of remote control or back of opener motor)
Classic Drive 3012, 3016, 3512
Quantum 3211, 3212, 3213, 3312, 3313, 3412, 3413
Year purchased can't be used to determine model.
How is this unit programed?
Will this opener work for a Wayne Dalton model 3213?
Yes, it is compatible.
can this work on model 02-3047?
Yes, it is compatible.
According to my manual the part # for the remote is 241165 (old # P3082). I need to replace it. What is your part #? Also, I need the photorlectric sending unit assuming it will work with my current receiver. I show part # 249320 for the sending unit and my receiver is part # 249318.
This is the correct remote - www.waynedaltonparts.com/products/wayne-dalton-remote-control-transmitter-303-mhz-297134 These are the compatible sensors - www.waynedaltonparts.com/products/wayne-dalton-infrared-safety-beam-sensors-260597-260600
Need control transmitter for Quantum model 3000 series 3212&3213. Do you have replacement ?
Yes. This remote is the correct one for your unit. Wayne Dalton Remote Control Transmitter 297134 309884 (303 Mhz)
is this compatable with part #297132?
Yes. 297134 is the correct replacement for 297132.
is this remote compatible with 02-3047U?
Yes. This is the correct replacement for all 02-3047 Units.
I currently have item WD-311085 which quit working and is now discontinued. You recommend WD-297134 to replace it. Do you supply programming directions for the new unit?
This is the correct replacement remote for the discontinued 311085. Programming instructions are included
Does this replace 02-3047 C1. D?
Yes, this is the manufacturer's replacement for that part number. It is the only compatible remote to replace that with.
Both of our remotes went out on the same day (one is a one button and the other a three button). The door opens from the wall mount. I have tried reprogramming both without success. Any suggestions? It's almost as if the power head isn't detecting the transmitter. Thank you.
That is symptomatic of a bad control board. Typically if your wireless devices stop working at the same time, the control board on the motor has gone bad and needs to be replaced. What is the model of your motor? I can suggest the correct replacement motor board.