PART NUMBER: LM-41A1344
Sears Craftsman LiftMaster Chamberlain Light Socket 41A1344Light Socket Plug for Sears Craftsman, LiftMaster, and Chamberlain chain and belt drive garage door opener models manufacturer from 1984 to current. Part no. 41A1344 or 4A1344
You will have to remove the plastic motor housing to access this most easily, which is how we started out in this video. You can pop the socket out from the front of your motor without taking the plastic housing off using a screwdriver to push the tab in (reference the left tab seen in this video), it's just a little more challenging. Once you have the socket removed from the motor body, take note of which combination of wires are attached to the back of it. Remove the wire terminals from the back two prongs on the socket (using a flathead screwdriver is easiest). Swap out socket for new one and reinsert the wire terminals the same location they were removed from the old socket. Reinstall socket to motor body as demonstrated.
Will this fit , Model PDS 800 , Presision Garage Door opener ?
If that is made by Sears Craftsman, LiftMaster, or Chamberlain with a DOM 1984 or newer, yes
Is this part compatible with part number 175B88 for a Chamberline Whisper Drive unit?
Compatible with all Sears Craftsman, LiftMaster, and Chamberlain chain and belt drive garage door opener models manufactured from 1984 to current.
Will this work on a Liftmaster 1300 series opener? If not do you have a replacement socket that will?
Yes it works with all Liftmaster motors.
Will these sockets work with the newer LED bulbs that have a larger base?
You will have to test it out to determine that. They fit a standard size light socket. I'm not sure if what you are referencing will fit.
Does this light socket work on liftmaster security plus model#1265?
Yes it works for all models manufactured from 1984 to present.
© 2018 Waynedaltonparts.com. Express Garage Doors Inc. All Rights Reserved.