Multi Code Wireless Keyless Entry Keypad 4200
Keyless Entry Keypad for garage door opener models using Multi Code receivers and transmitters with frequency 300 Mhz
To determine compatibility with your garage door opener, please look for a combination of the following features:
If you do not have any remote controls, usually the fact that you can see the radio receiver box on the back of your garage door opener powerhead is enough to be sure this remote control will work for you.
If you cannot see the radio receiver or are not sure it is the same one we have pictured, we recommend that you install a new radio receiver/transmitter to make this remote compatible with your motor - Multi Code 1090 receiverIncludes:
Programming InstructionsFor the full instructions, and programming illustrations click here.
I noticed there isn\'t a cover on this. Is there a way to keep moisture from getting in?
It is sealed and weatherproof.
is this item programed with a dip switch?
It doesn't have dip switches, but you enter the switch settings from your receiver - Download Instructions Here
We have a keypad that is currently not working. We followed the online directions to take battery out and reprogram but it is not working. In the directions it gives 2 different factory presets for radio 2-4-6-8-10 and 1-2-3-4. Which is correct? Also if you follow the steps and according to the instructions it seems to work but then when you try to use it the keyboard starts blinking and the door does not move-what does that mean? Are there any other trouble shooting steps?
The instruction manual on our website is from the manufacturer and all we have available.
1-2-3-4 is the factory preset for the 4 digit code. 2-4-6-8-10 is the factory preset for the radio receiver.
If you need to know the preset for the radio receiver it is 2-4-6-8-10
For the full instructions, and programming illustrations click here.
Is the wireless keyless entry keypad 4200 compatible with the challenger 9300 and the new car program?
Compatibility is based on the model of your receiver, not the motor. If you have a multi-code 300 mhz PN# 1090 receiver, then this will work. Anything else, and it won't