2" Torsion Replacement Springs with Installed Cones
Torsion spring coated and oil tempered and include winding and anchor cones installed.
Springs are factory coated black for smoother, cleaner operation. For use on doors 7' high with 4" standard lift drums. Engineered for maximum application range. Minimum 10,000 cycles, at +/- 7.5lbs of target door weight. Springs are made of steel coils with aluminum cones.
WARNING - Garage door springs, cables, brackets, and other hardware attached to the springs are under very high tension and, if handled improperly, can cause serious injury. Only a qualified professional or a mechanically experienced person should adjust them, but only by carefully following the manufacturer's instructions.
- Torsion spring with winding and anchor cone installed
- Engineered for maximum application range.
- Minimum 10,000 cycles, at +/-
7.5lbs of target door weight.
- Springs are made of steel coils with
aluminum cones.
- For use on doors 7' high with 4" standard lift drums. - You will need to already know the length and wire size to match with our selection.
Make sure you order the correct spring by comparing the information below with what you have.
To determine wire size measure 20 coils of wire and match with the chart below:
Length of 20 Coils
| Wire Size
| Length of 20 Coils
| Wire Size |
2 1/2"
| .125 | 5 3/4"
| .289
|
2 3/4"
| .135
| 5 7/8"
| .295 |
2 7/8"
| .142 | 6 1/8"
| .3065 |
| 3" | .1483 | 6 1/4"
| .3125 |
3 1/8"
| .1562 | 6 3/8"
| .3195 |
3 1/4"
| .162 | 6 5/8"
| .331 |
3 3/8"
| .170 | 6 7/8"
| .3437 |
3 1/2"
| .177 | 7 1/4"
| .3625 |
3 3/4"
| .1875 | 7 1/2"
| .375 |
3 7/8"
| .192 | 7 7/8"
| .3938 |
4 1/8"
| .207 | 8 1/8"
| .4062 |
4 3/8"
| .218 | 8 7/16"
| .4218 |
4 1/2"
| .2253 | 8 5/8"
| .4305 |
4 5/8"
| .2343 | 8 3/4"
| .4375 |
4 7/8"
| .2437 | 9 1/16"
| .4531 |
| 5" | .250 | 9 1/4"
| .4615 |
5 1/4"
| .2625 | 9 3/8"
| .4687 |
5 1/2"
| .273 | 9 3/4"
| .490 |
5 5/8"
| .283 | 10" | .500 |
7 Quick Tips for Buying Garage Door Opener Parts
- You will need to know several details about your garage door opener to select the correct parts for it. Manufacturer name and model number are usually necessary.
- To find detailed information about your garage door opener, look on the garage door opener power head located on the ceiling of your garage. Usually stickers and identifying information are found on the back or sides of the machine.
- Garage door opener manufacturers change the frequency at which remote controls and keypads function periodically, so you will generally need to know the model number of your garage door opener.
- Some models of garage door operators use radio gear (remote controls, keypads) from another manufacturer. In this case, you will need to know additional details found on a currently working remote control.
- Use our Garage Door Opener Selection Guide for details specific to your brand of garage door opener.
- On each product page there is a section called "Compatible with". This section gives details on manufacturers and models numbers that use the particular garage door opener part, remote control, keypad, gear, or other part.
- If you are still not sure which part will work with your garage door opener, Contact Us using the web form on the contact us page. Please include details about your garage door opener manufacturer and model number in your question.
| Customer Reviews |
Average Rating  |
|
| |
Nice quality,good fit,best price.I would buy another. |
| |
Reviewed by: ROGER JOHNSON from Livonia,NY.
on 4/25/2012 |
|
| |
Bought 2 of these (Right & Left side since you should replace them in pairs). They were exact replacements for my springs. Good quality & fairly easy to install but BE CAREFULL since it could be dangerous to do this type of repair. Price was the best I found on the web. Shipping was quick (it cost a bit because they weight a lot). Very please with them & the transaction. |
| |
Reviewed by: r gregor from Northern VA.
on 11/21/2011 |
|
